The FEIMAI product combines exceptional performance with timeless classic elegance that will satisfy you for years to come. The dependability and beauty of FEIMAI product will surpass your highest expectations.
Please take a few minutes to study this Product Care Guide. Pay special attention to the care and cleaning information.
For best results, keep the following in mind when caring for all kinds of bathroom accessories with different finish or materials:
GENERAL CLEANING
Use a mild detergent such as liquid dishwashing soap and warm water for cleaning. Rinse well to remove all detergent and gently dry. Wipe surfaces clean and rinse completely with water immediately after cleaner application. Rinse and dry any overspray that lands on nearby surfaces.
TEST FISRT - Always test your cleaning solution on an inconspicuous area before applying it to the entire surface.
NOTE: DO NOT LET CLEANERS SOAK - Do not allow cleaners to sit or soak on the product.
NOTE: DO NOT USE ABRASIVE CLEANERS OR SOLVENTS - Do not use abrasive cleaners that may scratch or dull the surface. Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
PRODUCT CARE
Water conditions vary across the country. Chemicals and minerals in water and air can combine to have an adverse effect on the finish of your products. In addition, nickel silver shares similar characteristics and appearance with sterling silver, and slight tarnishing is normal. For care of the chrome products, we recommend that you rinse away any traces of soap and gently dry with a clean soft cloth after each use. Do not allow materials such as toothpaste, nail polish remover or caustic drain cleaners to remain on the surface.
This care will maintain the high gloss finish of your product and avoid water spotting. An occasional application of a pure, nonabrasive wax is helpful in preventing water spot buildup and light buffing with a soft cloth will produce a high luster.
NOTE: DO NOT LET CLEANERS SOAK
NOTE: DO NOT USE ABRASIVE CLEANERS OR SOLVENTS
Do not use cleaners containing ammonia, bleach or acid. Rinse thoroughly and use a soft cloth to wipe the product dry after each use.
Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within factors, FEIMAI cannot guarantee the effectiveness of the formulas mentioned.
Ideal cleaning technique is to always blot dry any water from metal surfaces. Allowing water to evaporate on metal will form water deposits. It is important to use a dabbing action to dry metal, not an abrasive or rubbing action. Cleaning with a damp sponge and buff drying should keep your product looking beautiful.
Do not allow materials such as toothpaste, nail polish remover or caustic drain cleaners to remain on the surface.
NOTE: DO NOT LET CLEANERS SOAK
NOTE: DO NOT USE ABRASIVE CLEANERS OR SOLVENTS
CARE OF STAINLESS STEEL
Stainless steel products like shower niche & shelf should be cleaned at least once a week. Use cleaners in moderation and rinse immediately; do not let cleaners sit on the surface of the products. It should be rinsed and wiped out after each use so soap buildup doesn't occur.
NOTE: DO NOT USE CHEMICALS CLEANERS. Not allow cleaners to remain in contact with the surface for long periods, such as chlorides may corrode stainless steel. Make sure you rinse the surface immediately if you use a cleaner with chloride.
NOTE: DO NOT USE METAL SCOURING PADS or rust stains may appear in the product surface.
NOTE: DO NOT USE A RUBBER MAT. Organic particles under the mat may decay and cause the surface to be stained.
CARE OF MIRROR PRODUCTS
Mirrors are constructed of glass and aluminum. Use only a damp cloth to clean. Ammonia or vinegar-based cleaners can damage the mirrors; the use of these cleaners can attack and damage the edges and backing of mirrors.
Cleaners should never be sprayed directly onto the face of a mirror. When cleaning, spray the cloth and not the cabinet, mirror or surrounding surfaces. Care should always be taken to avoid getting the edges and backing of the mirror wet. Should they get wet, dry immediately.
NOTE: DO NOT USE CHEMICALS CLEANERS. Not allow cleaners to remain in contact with the surface for long periods.
NOTE: DO NOT USE ABRASIVE CLEANERS OR SOLVENTS. Not use abrasive cleaners on any part of the mirror or mirror frame.
CARE OF WOODEN MATERIAL
FEIMAI some module shelf/trolley shelf/paper holder top plate are made of beautiful natural wood materials. Color variations are typical, adding uniqueness and character to the board. To keep the surface of wood looking great, please follow these simple care and cleaning instructions.
CAN DO:
• Clean the wood surface with a soft cloth, keep the dry
• Apply a coat of mineral oil to all wood surfaces regularly (especially if the material appears faded or dried out)
• keep product in a dry, well-ventilated area
DO NOT:
• Clean the wood plate in a dishwasher with chemicals cleaners
• Put the wood plate immerse in water
